Nexus Beat Thumping Butt Plug: How the Remote Control Works

Nexus Beat Thumping Butt Plug: How the Remote Control Works

By Le Wand: Best Wand Vibrators and Sex Toys for Solo & Couples | Published: 2026-11-03

Category: Guides pratiques

Learn how to set up and pair the Nexus Beat Thumping Butt Plug remote, test the six vibration and thumping modes, and keep control reliable during play.

Quick answer

Charge the plug fully, power it on, then pair the remote before insertion so you can confirm every mode works and avoid mid-play fumbling. Always test the remote from the distance you plan to use it, because range and signal reliability depend on your space and body position.

Why the remote changes your setup routine

The Nexus Beat puts six vibration modes and six thumping patterns in the shaft, and the remote lets you or a partner switch between them without reaching down. That convenience only pays off if pairing and mode testing happen before the plug goes in, not after.

Because the catalog does not list a remote range, battery type, or waterproof rating for the remote, treat those as unknowns. Test the remote at your intended distance and keep it away from water unless the packaging confirms otherwise.

When a remote plug is the wrong pick

If you prefer silent toys, a remote adds a second device to manage and may not suit shared spaces where you cannot check controls discreetly. If you want app control, pattern customization, or long-distance play, this remote-based model may feel limited compared with app-enabled toys. Choose it for simple in-room control, not for remote play across rooms.

Step-by-step remote setup and use

  1. Charge both pieces fully: Charge the plug and the remote until their indicators show full, then keep them within reach on a clean towel. Common mistake: assuming a partial charge will last a full session; top up before every use if you have not played recently. A full charge on both devices prevents mid-session dropouts.
  2. Power on and pair before insertion: Turn on the plug first, then the remote, and follow the pairing sequence in the included instructions. Checkpoint: the remote should change modes on the plug while both sit on the towel. If nothing happens, power both off and repeat the sequence. Pairing on a flat surface is easier to troubleshoot than pairing during play.
  3. Test every mode and pattern: Cycle through all six vibration modes and all six thumping patterns, noting the order so you can return to favorites. Common mistake: only testing the first setting and then hunting for the right one mid-session. Write down or memorize the mode order before insertion.
  4. Check remote range in your space: Have a partner press buttons from the distance and position you plan to use, including under a blanket or around a body. Because range is not listed, treat any lag or missed press as your practical limit and move closer. Test from the farthest realistic spot, not just arm's length.
  5. Insert, then confirm control: Apply lubricant, insert the plug, and have the remote holder change one mode to confirm the signal still works. Common mistake: assuming the remote will work the same after insertion; body position can block signal, so recheck. A quick post-insertion mode change confirms the remote is still responsive.
  6. Power off and store separately: Turn off both devices, clean the plug according to the silicone-safe instructions, and store the remote apart so buttons are not pressed in storage. Checkpoint: if the plug turns on by itself later, the remote may have been stored against it. Separate storage prevents accidental battery drain.

Product facts

Shop Related Products

Plug anal Nexus Beat en silicone rechargeable avec télécommande

Plug anal Nexus Beat en silicone rechargeable avec télécommande

$68.99 $99.99

Shop Now