Silicone Flexflow Douche: How to Use and Clean It

Quick Answer

The b-Vibe Silicone Flexflow Douche uses a dual-opening nozzle for efficient cleaning. Follow these steps for safe, comfortable use and proper care.

Step-by-Step Instructions

1. Prepare the Douche: Fill the bulb with lukewarm water. Squeeze gently to expel air, then release to draw water in. Do not overfill—about half the bulb is enough. Common mistake: using hot water can cause burns. Always test the temperature on your wrist.
2. Lubricate and Insert: Apply a water-based lubricant to the nozzle and your anal area. Gently insert the nozzle about 1-2 inches, then squeeze the bulb slowly to release water. Common mistake: inserting too quickly or without enough lube can cause discomfort. Go slow.
3. Hold and Release: Hold the water inside for 10-15 seconds, then release over the toilet. Repeat until the water runs clear. Do not hold longer than 30 seconds. Common mistake: holding too long can cause cramping. Stick to short intervals.
4. Clean the Douche: Rinse the douche with warm water and mild soap or a dedicated toy cleaner. Use your fingers to clean the bulb interior. Air dry completely before storage. Common mistake: storing while damp can promote mold. Ensure it's fully dry.
5. Store Properly: Store the douche in a cool, dry place away from direct sunlight. Do not share with others to maintain hygiene. Common mistake: storing in a sealed bag while wet can cause damage. Use a breathable pouch.

Product Facts

• Silicone Flexflow Douche: The dual-opening nozzle design enables simultaneous fluid dispersion for efficient cleaning from multiple angles. This means you can achieve thorough hygiene in fewer refills, making the process quicker and more comfortable.